Oriettaqi's Weblog

History of clock

oriettaqi — Wed, 29 Oct 2008 03:53:12 +0000

Replica of an ancient Chinese incense clock

The clock is one of the oldest human inventions, meeting the need to consistently measure intervals of time shorter than the natural units, the day, the lunar month, and the year. Such measurement requires devices. Devices operating on several different physical processes have been used over the millennia, culminating in the clocks of today.

Sundials and other devices

The sundial, which measures the time of day by the direction of shadows cast by the sun, was widely used in ancient times. A well-designed sundial can measure local solar time with reasonable accuracy, and sundials continued to be used to monitor the performance of clocks until the modern era. However, its practical limitations – it requires the sun to shine and does not work at all during the night – encouraged the use of other techniques for measuring time.

Candle clocks and sticks of incense that burn down at approximately predictable speeds have also been used to estimate the passing of time. In an hourglass, fine sand pours through a tiny hole at a constant rate and indicates a predetermined passage of an arbitrary period of time.

Water clocks

A scale model of Su Song’s Astronomical Clock Tower, built in 11th century Kaifeng, China. It was driven by a large waterwheel, chain drive, and escapement mechanism.

Water clocks, also known as clepsydrae (sg: clepsydra), along with the sundials, are possibly the oldest time-measuring instruments, with the only exceptions being the vertical gnomon and the day-counting tally stick.^[2] Given their great antiquity, where and when they first existed are not known and perhaps unknowable. The bowl-shaped outflow is the simplest form of a water clock and is known to have existed in Babylon and in Egypt around the 16th century BC. Other regions of the world, including India and China, also have early evidence of water clocks, but the earliest dates are less certain. Some authors, however, write about water clocks appearing as early as 4000 BC in these regions of the world.^[3]

The Greek and Roman civilizations are credited for initially advancing water clock design to include complex gearing, which was connected to fanciful automata and also resulted in improved accuracy. These advances were passed on through Byzantium and Islamic times, eventually making their way to Europe. Independently, the Chinese developed their own advanced water clocks, passing their ideas on to Korea and Japan.

Some water clock designs were developed independently and some knowledge was transferred through the spread of trade. It is important to point out that the need for the common person to ‘know what time it is’ largely did not exist until the Industrial Revolution, when it became important to keep track of hours worked. In the earliest of times, however, the purpose for using a water clock was for astronomical and astrological reasons. These early water clocks were calibrated with a sundial. While never reaching the level of accuracy based on today’s standards of timekeeping, the water clock was the most accurate and commonly used timekeeping device for millennia, until it was replaced by the more accurate pendulum clock in 17th century Europe.

Early clocks

In 797 (or possibly 801), the Abbasid caliph of Baghdad, Harun al-Rashid, presented Charlemagne with an Asian Elephant named Abul-Abbas together with a “particularly elaborate example” of a water ^[4] clock.

None of the first clocks survived from 13th century Europe, but various mentions in church records reveal some of the early history of the clock.

Medieval religious institutions required clocks to measure and indicate the passing of time because, for many centuries, daily prayer and work schedules had to be strictly regulated. This was done by various types of time-telling and recording devices, such as water clocks, sundials and marked candles, probably used in combination. Important times and durations were broadcast by bells, rung either by hand or by some mechanical device such as a falling weight or rotating beater.

The word horologia (from the Greek ὡρα, hour, and λεγειν, to tell) was used to describe all these devices, but the use of this word (still used in several romance languages) for all timekeepers conceals from us the true nature of the mechanisms. For example, there is a record that in 1176 Sens Cathedral installed a ‘horologe’ but the mechanism used is unknown. According to Jocelin of Brakelond, in 1198 during a fire at the abbey of St Edmundsbury (now Bury St Edmunds), the monks ‘ran to the clock’ to fetch water, indicating that their water clock had a reservoir large enough to help extinguish the occasional fire ^[5].

These early clocks may not have used hands or dials, but “told” the time with audible signals.

A new mechanism

The word clock (from the Latin word clocca, “bell”), which gradually supersedes “horologe”, suggests that it was the sound of bells which also characterized the prototype mechanical clocks that appeared during the 13th century in Europe.

Between 1280 and 1320, there is an increase in the number of references to clocks and horologes in church records, and this probably indicates that a new type of clock mechanism had been devised. Existing clock mechanisms that used water power were being adapted to take their driving power from falling weights. This power was controlled by some form of oscillating mechanism, probably derived from existing bell-ringing or alarm devices. This controlled release of power – the escapement – marks the beginning of the true mechanical clock.

Outside of Europe, the escapement mechanism had been known and used in medieval China, as the Song Dynasty horologist and engineer Su Song (1020 – 1101) incorporated it into his astronomical clock-tower of Kaifeng in 1088^[6]. However, his astronomical clock and rotating armillary sphere still relied on the use of flowing water (ie. hydraulics), while European clockworks of the following centuries shed this old habit for a more efficient driving power of weights, in addition to the escapement mechanism.

The first mechanical clocks to be driven by weights and gears were invented by medieval Muslim engineers.^[7]^[8] The first geared mechanical clock was invented by the 11th-century Arab engineer Ibn Khalaf al-Muradi in Islamic Spain; the first weight-driven mechanical clocks, employing a mercury escapement mechanism and a clock face similar to an astrolabe dial, were also invented by Muslim engineers in the 11th century. A similar weight-driven mechanical clock later appeared in a Spanish language work compiled from earlier Arabic sources for Alfonso X in 1277.^[9] The knowledge of weight-driven mechanical clocks produced by Muslim engineers in Spain was transmitted to other parts of Europe through Latin translations of Arabic and Spanish texts on Muslim mechanical technology.^[10]

An elephant clock in a manuscript by Al-Jazari (1206 AD) from The Book of Knowledge of Ingenious Mechanical Devices. ^[11]

In the 13th century, clock construction and engineering entered a new phase with the advancements made by Al-Jazari, a Muslim engineer from Diyar-Bakr in South East Turkey, who is thought to be behind the birth to the concept of automatic machines^{[citation needed]}. While working for Artuqid king of Diyar-Bakr, Nasir al-Din, al-Jazari made numerous clocks of all shapes and sizes. In 1206 he was ordered by the king to document his inventions leading to the publication of an outstanding book on engineering called “The Book of Knowledge of Ingenious Mechanical Devices”^{[citation needed]}. This book became an invaluable resource for people of different engineering backgrounds as it described 50 mechanical devices in 6 categories, including water clocks. The most reputed clocks included the Elephant, the Castle and Scribe clocks, all of which were reconstructed by Muslim Heritage Consulting for Ibn Battuta Shopping Mall in Dubai (UAE), where they are fully functional. As well as telling the time, these grand clocks were symbols of status, grandeur and wealth of the Urtuq State.^[12]

These mechanical clocks were intended for two main purposes: for signalling and notification (e.g. the timing of services and public events), and for modeling the solar system. The former purpose is administrative, the latter arises naturally given the scholarly interest in astronomy, science, astrology, and how these subjects integrated with the religious philosophy of the time. The astrolabe was used both by astronomers and astrologers, and it was natural to apply a clockwork drive to the rotating plate to produce a working model of the solar system.

Simple clocks intended mainly for notification were installed in towers, and did not always require dials or hands. They would have announced the canonical hours or intervals between set times of prayer. Canonical hours varied in length as the times of sunrise and sunset shifted. The more sophisticated astronomical clocks would have had moving dials or hands, and would have shown the time in various time systems, including Italian hours, canonical hours, and time as measured by astronomers at the time. Both styles of clock started acquiring extravagant features such as automata.

In 1283, a large clock was installed at Dunstable Priory; its location above the rood screen suggests that it was not a water clock^{[citation needed]}. In 1292, Canterbury Cathedral installed a ‘great horloge’. Over the next 30 years there are brief mentions of clocks at a number of ecclesiastical institutions in England, Italy, and France. In 1322, a new clock was installed in Norwich, an expensive replacement for an earlier clock installed in 1273. This had a large (2 metre) astronomical dial with automata and bells. The costs of the installation included the full-time employment of two clockkeepers for two years^{[citation needed]}.

Early astronomical clocks

Richard of Wallingford pointing to a clock, his gift to St Albans Abbey

Besides the Chinese astronomical clock of Su Song in 1088 mentioned above, in Europe there were the clocks constructed by Richard of Wallingford in St Albans by 1336, and by Giovanni de Dondi in Padua from 1348 to 1364. They no longer exist, but detailed descriptions of their design and construction survive,^{[citation needed]} and modern reproductions have been made. They illustrate how quickly the theory of the mechanical clock had been translated into practical constructions, and also that one of the many impulses to their development had been the desire of astronomers to investigate celestial phenomena.

Wallingford’s clock had a large astrolabe-type dial, showing the sun, the moon’s age, phase, and node, a star map, and possibly the planets. In addition, it had a wheel of fortune and an indicator of the state of the tide at London Bridge. Bells rang every hour, the number of strokes indicating the time.

Dondi’s clock was a seven-sided construction, 1 metre high, with dials showing the time of day, including minutes, the motions of all the known planets, an automatic calendar of fixed and movable feasts, and an eclipse prediction hand rotating once every 18 years.

It is not known how accurate or reliable these clocks would have been. They were probably adjusted manually every day to compensate for errors caused by wear and imprecise manufacture.

The Salisbury Cathedral clock, built in 1386, is considered to be the world’s oldest surviving mechanical clock that strikes the hours^[13].

Later developments

Clockmakers developed their art in various ways. Building smaller clocks was a technical challenge, as was improving accuracy and reliability. Clocks could be impressive showpieces to demonstrate skilled craftsmanship, or less expensive, mass-produced items for domestic use. The escapement in particular was an important factor affecting the clock’s accuracy, so many different mechanisms were tried.

Spring-driven clocks appeared during the 1400s,^[14]^[15]^[16] although they are often erroneously credited to Nürnberg watchmaker Peter Henlein (or Henle, or Hele) around 1511.^[17]^[18]^[19] The earliest existing spring driven clock is the chamber clock given to Peter the Good, Duke of Burgundy, around 1430, now in the Germanisches Nationalmuseum.^[15] Spring power presented clockmakers with a new problem; how to keep the clock movement running at a constant rate as the spring ran down. This resulted in the invention of the stackfreed and the fusee in the 1400s, and many other innovations, down to the invention of the modern going barrel in 1760.

The first record of a minute hand on a clock is 1475, in the Almanus Manuscript of Brother Paul^{[citation needed]}.

During the 15th and 16th centuries, clockmaking flourished, particularly in the metalworking towns of Nuremberg and Augsburg, and in France, Blois. Some of the more basic table clocks have only one time-keeping hand, with the dial between the hour markers being divided into four equal parts making the clocks readable to the nearest 15 minutes. Other clocks were exhibitions of craftsmanship and skill, incorporating astronomical indicators and musical movements. The cross-beat escapement^{[citation needed]} was developed in 1585 by Jost Burgi, who also developed the remontoire. Burgi’s accurate clocks helped Tycho Brahe to observe astronomical events with much greater precision than before.

The first mechanical alarm clock was invented by the Ottoman engineer Taqi al-Din. He described the alarm clock in his book, The Brightest Stars for the Construction of Mechanical Clocks (Al-Kawākib al-durriyya fī wadh’ al-bankāmat al-dawriyya), published in 1556-1559. His alarm clock was capable of sounding at a specified time, achieved by placing a peg on the dial wheel. At the requested time, the peg activated a ringing device.^[20] In the same treatise, he described a mechanical astronomical clock called the “observational clock”, which was the first to measure time in minutes. He made use of his mathematical knowledge to design three dials which showed the hours, degrees and minutes.^[21] He later improved the design of his observational clock to measure time in seconds in an astronomical treatise written at his Istanbul observatory of al-Din (1577-1580). He described his observational clock as “a mechanical clock with three dials which show the hours, the minutes, and the seconds.” This was an important innovation in 16th-century practical astronomy, as previous clocks were not accurate enough to be used for astronomical purposes.^[22] He further improved the observational clock, using only one dial to represent the hours, minutes and seconds, describing it as “a mechanical clock with a dial showing the hours, minutes and seconds and we divided every minute into five seconds.”^[23]

Another early record of a second hand on a clock dates back to about 1560, on a clock now in the Fremersdorf collection.^{[citation needed]} However, this clock could not have been accurate, and the second hand was probably for indicating that the clock was working.

French rococo bracket clocks, (Museum of Time, Besançon)

The next development in accuracy occurred after 1657 with the invention of the pendulum clock. Galileo had the idea to use a swinging bob to regulate the motion of a time telling device earlier in the 17th century. Christiaan Huygens, however, is usually credited as the inventor. He determined the mathematical formula that related pendulum length to time (99.38 cm or 39.13 inches for the one second movement) and had the first pendulum-driven clock made. In 1670, the English clockmaker William Clement created the anchor escapement,^{[citation needed]} an improvement over Huygens’ crown escapement^{[citation needed]}. Within just one generation, minute hands and then second hands were added.

A major stimulus to improving the accuracy and reliability of clocks was the importance of precise time-keeping for navigation. The position of a ship at sea could be determined with reasonable accuracy if a navigator could refer to a clock that lost or gained less than about 10 seconds per day. This clock could not contain a pendulum, which would be virtually useless on a rocking ship. Many European governments offered a large prize for anyone that could determine longitude accurately; for example, Great Britain offered 20,000 pounds, equivalent to millions of dollars today. The reward was eventually claimed in 1761 by John Harrison, who dedicated his life to improving the accuracy of his clocks. His H5 clock is reported to have lost less than 5 seconds over 10 days.^{[citation needed]}

The excitement over the pendulum clock had attracted the attention of designers resulting in a proliferation of clock forms. Notably, the longcase clock (also known as the grandfather clock) was created to house the pendulum and works. The English clockmaker William Clement is also credited with developing this form in 1670 or 1671. It was also at this time that clock cases began to be made of wood and clock faces to utilize enamel as well as hand-painted ceramics.

French decimal clock from the time of the French Revolution

On November 17, 1797, Eli Terry received his first patent for a clock. Terry is known as the founder of the American clock-making industry.

Alexander Bain, Scottish clockmaker, patented the electric clock in 1840. The electric clock’s mainspring is wound either with an electric motor or with an electro-magnet and armature. In 1841, he first patented the electromagnetic pendulum.

The development of electronics in the twentieth century led to clocks with no clockwork parts at all. Time in these cases is measured in several ways, such as by the vibration of a tuning fork, the behaviour of quartz crystals, the resonance of polycarbonates.^{[citation needed]}, or the quantum vibrations of atoms. Even mechanical clocks have since come to be largely powered by batteries, removing the need for winding.

How clocks work

The invention of the mechanical clock in the 13th century initiated a change in timekeeping methods from continuous processes, such as the motion of the gnomon’s shadow on a sundial or the flow of liquid in a water clock, to repetitive oscillatory processes, like the swing of a pendulum or the vibration of a quartz crystal, which were more accurate.^[24] All modern clocks use oscillation.

Although the methods they use vary, all oscillating clocks, mechanical and digital and atomic, work similarly and can be divided into analogous parts.^[25]^[26]^[27] They consist of an object that repeats the same motion over and over again, an oscillator, with a precisely constant time interval between each repetition, or ‘beat’. Attached to the oscillator is a controller device, which sustains the oscillator’s motion by replacing the energy it loses to friction, and converts its oscillations into a series of pulses. The pulses are then added up in a chain of some type of counters to express the time in convenient units, usually seconds, minutes, hours, etc. Then finally some kind of indicator displays the result in a human-readable form.

Power source

This provides power to keep the clock going.

In mechanical clocks, this is either a weight suspended from a cord wrapped around a pulley, or a spiral spring called a mainspring.
In electric clocks, it is either a battery or the AC power line.

Since clocks must run continuously, there is often a small secondary power source to keep the clock going temporarily during interruptions in the main power. In old mechanical clocks, a maintaining power spring provided force to turn the clock’s wheels while the mainspring was being wound up.^[28] In quartz clocks a backup battery or capacitor is often included to keep the clock going if the power cord is unplugged.

Oscillator

The timekeeping element in every modern clock is a harmonic oscillator, a physical object (resonator) that vibrates or oscillates repetitively at a precisely constant frequency.^[29]

In mechanical clocks, this is either a pendulum or a balance wheel.
In some early electronic clocks and watches such as the Accutron, it is a tuning fork.
In quartz clocks and watches, it is a quartz crystal.
In atomic clocks, it is the vibration of electrons in atoms as they emit microwaves.
In early mechanical clocks before 1657, it was a crude balance wheel or foliot which was not a harmonic oscillator because it lacked a balance spring. As a result they were very inaccurate, with errors of perhaps an hour a day.^[30]

The advantage of a harmonic oscillator over other forms of oscillator is that it employs resonance to vibrate at a precise natural resonant frequency or ‘beat’ dependent only on its physical characteristics, and resists vibrating at other rates. The possible precision achievable by a harmonic oscillator is measured by a parameter called its Q,^[31]^[32] or quality factor, which increases (other things being equal) with its resonant frequency.^[33] This is why there has been a long term trend toward higher frequency oscillators in clocks. Balance wheels and pendulums always include a means of adjusting the rate of the timepiece. Quartz timepieces sometimes include a rate screw that adjusts a capacitor for that purpose. Atomic clocks are primary standards, and their rate cannot be adjusted.

Synchronized or slave clocks

Some clocks rely for their accuracy on an external oscillator; that is, they are automatically synchronized to a more accurate clock:

Slave clocks, used in large institutions and schools from the 1860s to the 1970s, kept time with a pendulum, but were wired to a master clock in the building, and periodically received a signal to synchronize them with the master, often on the hour.^[34] Later versions without pendulums were triggered by a pulse from the master clock and certain sequences used to force rapid synchronization following a power failure.
Synchronous electric clocks don’t have an internal oscillator, but rely on the 50 or 60 Hz oscillation of the AC power line, which is synchronized by the utility to a precision oscillator. This drives a synchronous motor in the clock which rotates once for every cycle of the line voltage, and drives the gear train.
Computer real time clocks keep time with a quartz crystal, but are periodically (usually weekly) synchronized over the internet to atomic clocks (UTC), using a system called Network Time Protocol.
Radio clocks keep time with a quartz crystal, but are periodically (often daily) synchronized to atomic clocks (UTC) with time signals from government radio stations like WWV, WWVB, CHU, DCF77 and the GPS system.

Controller

This has the dual function of keeping the oscillator running by giving it ‘pushes’ to replace the energy lost to friction, and converting its vibrations into a series of pulses that serve to measure the time.

In mechanical clocks, this is the escapement, which gives precise pushes to the swinging pendulum or balance wheel, and releases one gear tooth of the escape wheel at each swing, allowing all the clock’s wheels to move forward a fixed amount with each swing.
In electronic clocks this is an electronic oscillator circuit that gives the vibrating quartz crystal or tuning fork tiny ‘pushes’, and generates a series of electrical pulses, one for each vibration of the crystal, which is called the clock signal.
In atomic clocks the controller is an evacuated microwave cavity attached to a microwave oscillator controlled by a microprocessor. A thin gas of cesium atoms is released into the cavity where they are exposed to microwaves. A laser measures how many atoms have absorbed the microwaves, and an electronic feedback control system called a phase locked loop tunes the microwave oscillator until it is at the exact frequency that causes the atoms to vibrate and absorb the microwaves. Then the microwave signal is divided by digital counters to become the clock signal.^[35]

In mechanical clocks, the low Q of the balance wheel or pendulum oscillator made them very sensitive to the disturbing effect of the impulses of the escapement, so the escapement had a great effect on the accuracy of the clock, and many escapement designs were tried. The higher Q of resonators in electronic clocks makes them relatively insensitive to the disturbing effects of the drive power, so the driving oscillator circuit is a much less critical component.^[29]

Counter chain

This counts the pulses and adds them up to get traditional time units of seconds, minutes, hours, etc. It usually has a provision for setting the clock by manually entering the correct time into the counter.

In mechanical clocks this is done mechanically by a gear train, known as the wheel train. The gear train also has a second function; to transmit mechanical power from the power source to run the oscillator. There is a friction coupling called the ‘cannon pinion’ between the gears driving the hands and the rest of the clock, allowing the hands to be turned by a knob on the back to set the time.^[36]
In digital clocks a series of integrated circuit counters or dividers add the pulses up digitally, using binary logic. Often pushbuttons on the case allow the hour and minute counters to be incremented and decremented to set the time.

Indicator

This displays the count of seconds, minutes, hours, etc. in a human readable form.

The earliest mechanical clocks in the 13th century didn’t have a visual indicator and signalled the time audibly by striking bells. Many clocks to this day are striking clocks which chime the hours.
Analog clocks, including almost all mechanical and some electronic clocks, have a traditional dial or clock face, that displays the time in analog form with moving hour and minute hand. In quartz clocks with analog faces, a 1 Hz signal from the counters actuates a stepper motor which moves the second hand forward at each pulse, and the minute and hour hands are moved by gears from the shaft of the second hand.
Digital clocks display the time in periodically changing digits on a digital display.
Talking clocks and the speaking clock services provided by telephone companies speak the time audibly, using either recorded or digitally synthesized voices.

wooden drawer cabinet

underwater led light

metal cutting disc

Walnut Engineered Flooring

Decorative Glass Bottles

outdoor swing chairs

ir wireless headphone

wall mounted shelf

Fire Alarm Horn

Sodium Light Bulbs

emergency stop switches

Down Coats Winter

Flashlight

oriettaqi — Tue, 28 Oct 2008 15:17:02 +0000

A common flashlight

For other uses, see Flashlight (disambiguation).

A flashlight (also called an electric torch or torch) is a portable electric spotlight which emits light from a small incandescent lightbulb, or from one or more light-emitting diodes (LEDs). The light source is mounted in a housing which contains a parabolic reflector, a clear protective lens, a power source (typically electric batteries), and an electric power switch.

While most flashlights are intended to be held in the hand, there are also helmet-mounted flashlights designed for miners and campers. Some types of flashlights can be powered by hand-cranked dynamos or electromagnetic induction. It is known as a flashlight mainly in the United States and Canada and as a torch or electric torch in most Commonwealth countries.

History

An 1899 Eveready flashlight, one of the earliest flashlight models.

In 1898, Joshua Lionel Cowen invented a decorative lighting fixture for potted plants which consisted of a metal tube housing a light bulb and a dry cell battery. It failed commercially, and so Cowen sold his company and patents to Conrad Hubert that same year and turned his attention to building and selling model trains. Hubert renamed Cowen’s company the American Electrical Novelty & Manufacturing Company and, recognizing the true potential of Cowen’s invention, hired David Misell to produce a tubular flashlight for portable use.

They donated some models to the New York City police, who responded favorably to it.^[1] These early flashlights ran on zinc-carbon batteries, which were poor at providing sustained currents; they would run down after a while and needed to rest before being usable again.^[2] Since these early flashlights also used energy-inefficient carbon filament bulbs, this happened rather quickly, and consequently they could only be used in brief flashes, hence the popular name flashlight.

General information

A high power torch

A typical flashlight consists of a small incandescent lightbulb (or, in recent models, an LED) with associated parabolic reflector, powered by electric batteries, and with an electric power switch. The components are mounted in a housing that contains the necessary electric circuit and provides ease of handling, a means of access to the batteries for replacement, and a clear covering over the lightbulb for its protection.

Although a relatively simple device, its invention did not occur until the late 19th century because it depended upon the earlier invention of the electric battery and incandescent light bulb.

Incandescent

Incandescent flashlights use bulbs that contain a heated-up coil of tungsten wire, which gives off light energy as well as heat.The bulbs are filled with gas (usually argon perhaps with a trace of a Halogen, in higher quality models, Xenon is used.) A popular example of an incandescent flashlight is the Maglite by Mag Instrument. and are capable of producing upwards of 4,000 lumens [1]. Flashlight hobbyists often modify Maglites by replacing the bulb, reflector, switch, and batteries with more powerful options, producing much more light than a stock Maglite.

LED

Electronically regulated, variable output LED flashlight

Recently, flashlights which use light-emitting diodes (LEDs) instead of conventional lightbulbs have become available. LEDs have existed for decades, mainly as low-power indicator lights. In 1999, Lumileds Corporation of San Jose, CA, introduced the Luxeon LED, a high-power white-light emitter. For the first time this made possible LED flashlights with power and running time better than some incandescent lights. The first Luxeon LED flashlight was the Arc LS in 2001.

LEDs can be significantly more efficient at lower power levels and so use less battery energy than ordinary lightbulbs. Such flashlights have longer battery lifetimes, in some cases hundreds of hours, although the LED efficiency advantage diminishes at higher power levels. LEDs also survive sharp blows that often break conventional lightbulbs.

LED flashlights are often electronically regulated to maintain constant light output as the batteries fade. By contrast a non-regulated flashlight becomes progressively dimmer, sometimes spending much of the total running time below 50 percent brightness level.

A common misconception about LED-based flashlights is that they generate no heat. While lower-power LED flashlights generate little heat, more powerful LED lights do generate significant amounts of heat – although not as radiant energy, as the semiconductor junction inherently dissipates heat. For this reason higher-powered LED flashlights usually have aluminum bodies and can become quite warm during use. The use of aluminum is largely due to its thermal properties, acting as a heatsink for the high-power LED. Very few high-output LED flashlights use a plastic body due to plastic’s being a thermal insulator rather than a conductor.

HID

Another less common type of flashlight uses a High Intensity Discharge (HID) light source. It works by passing an electric current through a ball of ionized gas, which glows very brightly.

Some advantages of this design are that they produce more light than an incandescent flashlight using the same amount of electricity, and the bulb will last a longer time and is more shock resistant than a regular incandescent bulb. However, they are more expensive and are usually rather bulky. An example of an HID flashlight is the Surefire Hellfire Weaponlight.

Other designs

A headlamp is a flashlight worn on the head for hands-free operation. Powerful headlamps mounted on helmets have been used in mining for decades, but general-purpose ones with fabric straps are now also available.

Sometimes a light is mounted to a handgun or rifle.^[3]^[4] See also Streamlight and SureFire.

Most flashlights are cylindrical in design, with the lamp assembly attached to one end. However, early designs came in a variety of shapes. Many resembled lanterns of the day, consisting largely of a box with a handle and the lamp attached to the front. Some others were made to have a similar appearance to candles. It is possible that future developments of battery and LED technology will bring interesting new designs. For instance, one very small light consists of a few LEDs with a switch, designed to be an endcap for a 9-volt battery.

High-end flashlights

GatLight V1 Luxeon LED flashlight. Dimensions: 3.1″ x 1.0″

High end lights often go for as much as several hundreds of pounds/euros/dollars. Using metals such as titanium, steel, or even silver, and often being limited in production they often end up as collector’s items trading at many times their original sales price. Such flashlights are very advanced, using special batteries, have adjustable brightness levels, waterproof ratings, and are very bright. As a unique example of a high end manufacturer, with non-cylindrical, unique design, Lumencraft was one of the first manufacturer to create designs that cater more towards a higher end design and art-conscious market rather than the tactical military and law enforcement markets.

Other power sources

Since batteries can be a burdensome cost in developed countries, let alone in the third world, the development of self-powered flashlights is a welcome advance. Some use solar panels to recharge their batteries during the day.

Mechanical power

Dynamo light (partly disassembled)

Some flashlights have an electrical generator built into them. One type of dynamo-powered flashlight has a winding crank connected to a small alternator that feeds several diode bridges with their outputs connected in parallel feeding a field effect transistor that charges a capacitor that connects to one or more LEDs. Others generate electricity using electromagnetic induction. They use a strong permanent magnet that can freely slide up and down a tube, passing through a coil of wire as it does. Shaking the flashlight will charge a capacitor or a rechargeable battery that supplies a current to a light source, typically a light-emitting diode or, more rarely, an incandescent light bulb.

see more:

wooden drawer cabinet

Krypton Flashlight Bulb

Flash Light Glass

5 watt led flashlights

flashlight led solar

LED Truck Lights

led crank light

solar led garden lights

Dome Lights

led project clock

cylinder lawn mowers